This issue mainly occurs due to corrupted ethernet drivers on Windows 11. However, there are other issues to be blamed for this error. Following the troubleshooting methods mentioned below will help you quickly fix any network connectivity issues. Also Read- Fix Windows 11 Setup Failed to Validate Product Key
How to Fix Ethernet Connection Not Working in Windows 11?
Below are some troubleshooting methods that may help you fix this issue:
How to Fix Ethernet Connection Not Working in Windows 11?Fix 1: Check the Ethernet Cable and ConnectionFix 2: Check Network Status in SettingsFix 3: Run Windows Network TroubleshooterFix 4: Run Network CommandsFix 5: Reinstall the Ethernet Network Adapter DriversFix 6: Perform a Network ResetFix 7: Power Cycle your Modem and Wireless RouterFix 8: Connect to a Wi-Fi NetworkFix 9: Reset Your PCWrapping Up
Fix 1: Check the Ethernet Cable and Connection
Before getting started with complex methods, ensure the ethernet cable is plugged into the Ethernet port on your PC and the router. Do check if the cable isn’t damaged; in that case, use another cable to see if it works.
Fix 2: Check Network Status in Settings
Check network status in settings and make sure it says Connected. It will say Action Needed if there is an error. Here is how you can do it:
Fix 3: Run Windows Network Troubleshooter
Running the network troubleshooter will identify and fix the issue automatically. Follow the steps given below to run the network troubleshooter:
Fix 4: Run Network Commands
Try running network commands to reset the TCP/IP stack manually. Then release and renew the IP address and flash the DNS client resolve cache. Follow these steps to do so:
Fix 5: Reinstall the Ethernet Network Adapter Drivers
You might face this issue if you use corrupt or outdated Ethernet network adapter drivers. Consider this method if your network connection stops working after a recent update. Here is how you can do it:
Fix 6: Perform a Network Reset
If you still have trouble connecting to an internet connection via Ethernet, perform a network reset on your device. Performing a network reset will remove all network adaptors and their settings. After the PC restarts, all the adaptors are installed again to their default settings. Here is how you can do it:
Fix 7: Power Cycle your Modem and Wireless Router
Power cycling your modem and wireless router will help build a new connection with your ISP. While doing so, everyone connected to the network will be disconnected temporarily. These steps can vary from device to device, but here are the general ones:
Fix 8: Connect to a Wi-Fi Network
If your router supports Wi-Fi, try connecting to the Wi-Fi network instead. This will help get you connected to the internet and get to the source of the issue.
Fix 9: Reset Your PC
If none of the above-mentioned steps could help you, reset your PC. Sometimes the error is present in Windows core files that cannot be verified manually. Here is how you can factory reset your PC:
Wrapping Up
That’s all on how you can fix the Ethernet connection not working in Windows 11. We hope that the troubleshooting methods mentioned above were able to help you. If you are still facing the issue, it might be a hardware problem, and to resolve it visit the nearest service center of your device OEM. If you have any suggestions or doubts, let us know in the comments section.
